Clutch Part Numbers

PostPost by: smo17003 » Wed Oct 18, 2006 11:05 am

I have a new unused clutch cover that I bought years ago when I used to run a Mk2 Lotus Cortina. The cover is numbered HE2842, and from memory I think this was listed as a heavy duty clutch for the L/C. I would obviously like to use it on my S4 but I am unable to find any references to this number. Could someone help with confirming that this cover is OK for Elan use and also I would like the part numbers of the correct plate and bearing to match.

Mike
smo17003
Third Gear
Third Gear
 
Posts: 348
Joined: 11 May 2006

PostPost by: pmallinson » Wed Oct 18, 2006 11:50 am

Hi

The data I have in a listing I'm putting together is as follows

Clutch plate & Pressure plate = AP 47625/209
Clutch Trust Bearing = Ford 105E7580-B, JC Whitney 89-4134,
SKF 307500 For the 4 speed box

Clutch Trust Bearing = Ford 3014E7548-C SKF 413708 Fafnir CT5540 for the 5 speed box

Hope this help

Cheers
Peter Mallinson
[email protected]
User avatar
pmallinson
Second Gear
Second Gear
 
Posts: 177
Joined: 05 Nov 2005

PostPost by: john-c-elan+2 » Wed Oct 18, 2006 7:13 pm

Borg & Beck catalogue says: HE2842 - Escort RS1600 73-74, Escort t/c
68-71, Lotus cortina 67-70. jc
john-c-elan+2
Second Gear
Second Gear
 
Posts: 122
Joined: 22 Sep 2003

PostPost by: smo17003 » Thu Oct 19, 2006 8:39 am

john-c-elan+2 wrote:Borg & Beck catalogue says: HE2842 - Escort RS1600 73-74, Escort t/c
68-71, Lotus cortina 67-70. jc


Thank's for that John. As it does not list Elan for this clutch I guess I'll have to put the thing on Ebay soon. :)
smo17003
Third Gear
Third Gear
 
Posts: 348
Joined: 11 May 2006

PostPost by: types26/36 » Thu Oct 19, 2006 9:38 am

smo17003 wrote:I have a new unused clutch cover that I bought years ago when I used to run a Mk2 Lotus Cortina. The cover is numbered HE2842,


I also have a HE2842 pressure plate, it does not have the plate attached to the diaphram fingers and to use it in a 4sp Elan you would have to change the release bearing from the flat faced type to the rounded face type.
Mine is also listed for use with a Twin Cam Escort.
Brian
64 S2 Roadster
72 Sprint FHC
User avatar
types26/36
Coveted Fifth Gear
Coveted Fifth Gear
 
Posts: 3872
Joined: 11 Sep 2003

PostPost by: smo17003 » Thu Oct 19, 2006 12:42 pm

types26/36/74 wrote:
smo17003 wrote:I have a new unused clutch cover that I bought years ago when I used to run a Mk2 Lotus Cortina. The cover is numbered HE2842,


I also have a HE2842 pressure plate, it does not have the plate attached to the diaphram fingers and to use it in a 4sp Elan you would have to change the release bearing from the flat faced type to the rounded face type.
Mine is also listed for use with a Twin Cam Escort.


Brian,

Any chance of the corresponding part numbers for the driven plate and the bearing?

Cheers

Mike
smo17003
Third Gear
Third Gear
 
Posts: 348
Joined: 11 May 2006

PostPost by: types26/36 » Thu Oct 19, 2006 3:16 pm

smo17003 wrote:
smo17003 wrote:]
Any chance of the corresponding part numbers for the driven plate and the bearing?


I fitted one including friction plate and rounded release bearing to my S2 (4sp) several years ago and to the best of my knowlege it is just the 5sp set up ........8.5" friction plate as opposed to 8" plate.
I cannot remember if I had to change or modify the release bearing carrier or not. Sorry I dont have the part numbers but I'm sure "john-c-elan+2" has got them ?????.........John?
Brian
64 S2 Roadster
72 Sprint FHC
User avatar
types26/36
Coveted Fifth Gear
Coveted Fifth Gear
 
Posts: 3872
Joined: 11 Sep 2003

Total Online:

Users browsing this forum: No registered users and 20 guests