Page 1 of 1

Bonnet cable knob

PostPosted: Mon Aug 01, 2022 11:25 am
by cadwell
I am fitting a new bonnet opening cable during my S4 rebuild. It has a plain knob with no lettering so I should very much like to transfer the original knob off the old cable.
It seems to be very well attached, so I wonder if anyone has successfully removed it and araldited it? To the new cable?

Thanks

Peter

Re: Bonnet cable knob

PostPosted: Mon Aug 01, 2022 12:40 pm
by lotusfan
Hi Peter

I transferred the original knob to the new cable when I did my restoration. My recollection is that the original cable was hard soldered or silver soldered into a slot in the metal part of the original knob. Having removed the old cable I repeated the process to fix the new cable to the original knob.

In my view the use of araldite would not give a good result. HTH

Re: Bonnet cable knob

PostPosted: Mon Aug 01, 2022 3:01 pm
by cadwell
Hi Mike
Thanks for the very quick response. Brilliant I will sort it now.
Many thanks
Peter

Re: Bonnet cable knob

PostPosted: Mon Aug 01, 2022 5:57 pm
by trw99
By the by, the 'Bonnet Lock' pull handles are now being reproduced by Rover P5 specialists Wadhams.

Here is a link to the relevant page: https://www.jrwadhams.co.uk/browse-p5-c ... 33937.html

You may have to make some changes to fit the Elan cable, but at least you would have the correct handle.

Tim

Re: Bonnet cable knob

PostPosted: Mon Aug 01, 2022 7:14 pm
by cadwell
Thanks Tim, but I have now taken Mike’s advice, unsoldered the old cable and soldered on the new. Simples!
I’m afraid that as a very old codger I was just looking at taking the knob off rather than looking at unsoldering the cable.
What a wonderful forum this is, with such helpful people!

Re: Bonnet cable knob

PostPosted: Tue Aug 02, 2022 6:38 pm
by RAJ2628
Makes you wonder, if Rover spares suppliers can supply an engraved bonnet pull handle, why can't Lotus suppliers do the same.

Re: Bonnet cable knob

PostPosted: Tue Aug 02, 2022 7:35 pm
by cadwell
Yes, good point Tim. Now that Classic Lotus are about to start selling parts we may see a huge improvement in holding stock and quality so let’s see what happens.