Gazzerb wrote:NYK
Hope the photo (turn it 90° clockwise...) shows what you require i.e. the hole in the body where the door wiring enters the cabin.
The dimensions for mine are; height to hole centre above flat surface of the cill is 10". The hole centre is 1 3/4" in front of the glass fibre flange. The diameter is about 5/8" or just large enough to accept the steel wiring conduit and passes through both inner and outer skins.
Obviously it is important that this hole lines up with the larger hole in the front of the door!
Please ask if you require any further information and I will do my best to help.
Regards
Gary
Thanks Gary, are the wires hidden behind the carpet or do they come through the carpet?