Type 26 Door Weatherstrip Trim Parts
Posted: Wed Jul 15, 2020 1:40 amOn Fakebook there was a recent thread asking for help doing a 3D model of the Type 26 Door Weatherstrip Mounting Channels. I went ahead and modeled them up using the CAD software I use at work and decided to make them available to whoever needs them. You should be able to take the .dxf flat files and the .stp 3D files to a sheet metal shop and have them made.
The CAD files are available here: https://cad.onshape.com/documents/7d4052196b2b3a96add8447c/w/1f57ff50f7ec0430932bb9eb/e/b597dc4791e8d0397ff8f17e
I did not put the hole in the flange end, as I think it would be better for the user to drill them to fit their car.
Hope this helps someone out there. I'm also open to suggestions of how to improve the fit.
The CAD files are available here: https://cad.onshape.com/documents/7d4052196b2b3a96add8447c/w/1f57ff50f7ec0430932bb9eb/e/b597dc4791e8d0397ff8f17e
I did not put the hole in the flange end, as I think it would be better for the user to drill them to fit their car.
Hope this helps someone out there. I'm also open to suggestions of how to improve the fit.