Lotus Elan and Lotus Elan Plus 2 Forums

With VHT for smaller delicate parts you cam also use a hairdryer or hot air gun, at about 10-15 cms from the parts, I use this method when doing cam covers as they don't fit inner oven. I have a box I place them in to catch as much of the heat as possible

V

There seems to be a few different formulations. Was the part #CSP201? For the VHT paint?

Thanks

snowyelan wrote:There seems to be a few different formulations. Was the part #CSP201? For the VHT paint?

Thanks

SP201 on the bar code and ESP201007 shown in the production data on the base.