Elan Sprint/S4 seatbelt position.
Posted: Sun Jun 21, 2020 8:10 pm
Hi I have put on a previous post on removing my roll cage which has been done and many thanks for the advice on getting the lower sill bars removed.
I have located the two bottom seatbelt mounting points but not the rear upper ones every search I do shows Plus 2 mounting positions. The logical place is the far rear corners where there are two holes and I’ve made up two safety brackets up as there looks nowhere enough strength in the shell around the holes.
I have added photos of where I have positioned these can someone confirm these are correct before I fibreglass the mounting point in. Sorry I can’t get the photo to sit vertically.
Many thanks
Mike
I have located the two bottom seatbelt mounting points but not the rear upper ones every search I do shows Plus 2 mounting positions. The logical place is the far rear corners where there are two holes and I’ve made up two safety brackets up as there looks nowhere enough strength in the shell around the holes.
I have added photos of where I have positioned these can someone confirm these are correct before I fibreglass the mounting point in. Sorry I can’t get the photo to sit vertically.
Many thanks
Mike