Glove Box Brackets
Posted: Wed Feb 06, 2019 11:47 amAs part of my winter project I have remade brackets to hold the Glove Box to the Dash. The side brackets are the same as the original, but the I improved the top & bottom brackets by using Aluminium Angle:
These parts don't appear to be available from our normal parts vendors, so here's a set of prints to allow anyone else to produce a set:
Note, the brackets are handed, the drawings are for LHD, if you need RHD use a mirror...
- Steel brackets after paint (with spacer shim for inner bracket & lock plate)
- Outer Bracket
- Lower Bracket
- Inner & Upper Bracket
These parts don't appear to be available from our normal parts vendors, so here's a set of prints to allow anyone else to produce a set:
Elan_GloveBoxBrackets_LHD.pdf- (120.16 KiB) Downloaded 382 times
Note, the brackets are handed, the drawings are for LHD, if you need RHD use a mirror...