Page 4 of 4

Re: S2 26R Front Bumper question...

PostPosted: Fri Feb 09, 2018 6:59 am
by Frogelan
Roy, thanks for those useful additional points with numbers attached!

BTW, I have consulted Shaun Pickering of SP Suspension (Spalding, Lincs) is ex JWE Banks and a Koni specialist.

Sean dyno tested my shocks (the front Konis were NOS found by luck in the US, for the rears were 2nd hand from SP).

I think I now have the right spec for what I am after (a return to a 60s racing specification with softer springs), but I will ask him to double check the fitting to see what is happening on bump and droop positions once my rebuild is properly underway.