S2 26R Front Bumper question...
46 posts
• Page 4 of 4 • 1, 2, 3, 4
Post by: Frogelan » Fri Feb 09, 2018 6:59 am
Roy, thanks for those useful additional points with numbers attached!
BTW, I have consulted Shaun Pickering of SP Suspension (Spalding, Lincs) is ex JWE Banks and a Koni specialist.
Sean dyno tested my shocks (the front Konis were NOS found by luck in the US, for the rears were 2nd hand from SP).
I think I now have the right spec for what I am after (a return to a 60s racing specification with softer springs), but I will ask him to double check the fitting to see what is happening on bump and droop positions once my rebuild is properly underway.
BTW, I have consulted Shaun Pickering of SP Suspension (Spalding, Lincs) is ex JWE Banks and a Koni specialist.
Sean dyno tested my shocks (the front Konis were NOS found by luck in the US, for the rears were 2nd hand from SP).
I think I now have the right spec for what I am after (a return to a 60s racing specification with softer springs), but I will ask him to double check the fitting to see what is happening on bump and droop positions once my rebuild is properly underway.
1965 Lotus Elan S2 26/4022 (originally Dutchess Lotus East, PA and NJ Area, USA)
- Frogelan
- Fourth Gear
- Posts: 606
- Joined: 03 Jul 2017
46 posts
• Page 4 of 4 • 1, 2, 3, 4
Total Online:
Users browsing this forum: No registered users and 22 guests
Site map
SitemapIndex
RSS Feed