Window lift cable special fasteners.
Posted: Sat May 20, 2017 9:47 am
Hello guys.
Trust you are all well.
A quick update. .... I am still under treatment for the Prostate cancer and holding my own.So far so good. Had a few ticker issues a year or so ago and we discovered I now have a leaky and noisy heart valve. This causes some Atrial fibrillation which is very uncomfortable and very tiring too.
So that's where I am health wise.
Car wise ? I don't have any lotus right now but had a fancy for an M 100 elan just as a toy. So I might start looking seriously quite soon.
REASON for this post. One of our guys asked me to make some special window lift cables / rope fasteners which take out the risk of breaking ones glass and also makes fitting the system simpler. Now. Our said member informed me that the said items (package) had not arrived.. The good old Postal service had lost the things... Sheesh... So I made him another 4 from my now very dwindled stock of bits and also snapped my last special coated M4 tap!! However I managed it. Then. Guess what? the originals were eventually delivered. (Some 1st class service that eh?!!). Sooooooo... I now have a set of 4 fasteners available. 1 set only. I could possibly make another two sets also if any needed.
Editor => Alex is no longer providing the cable tools due to health reasons.
Just get in touch.
Al' ....
Trust you are all well.
A quick update. .... I am still under treatment for the Prostate cancer and holding my own.So far so good. Had a few ticker issues a year or so ago and we discovered I now have a leaky and noisy heart valve. This causes some Atrial fibrillation which is very uncomfortable and very tiring too.
So that's where I am health wise.
Car wise ? I don't have any lotus right now but had a fancy for an M 100 elan just as a toy. So I might start looking seriously quite soon.
REASON for this post. One of our guys asked me to make some special window lift cables / rope fasteners which take out the risk of breaking ones glass and also makes fitting the system simpler. Now. Our said member informed me that the said items (package) had not arrived.. The good old Postal service had lost the things... Sheesh... So I made him another 4 from my now very dwindled stock of bits and also snapped my last special coated M4 tap!! However I managed it. Then. Guess what? the originals were eventually delivered. (Some 1st class service that eh?!!). Sooooooo... I now have a set of 4 fasteners available. 1 set only. I could possibly make another two sets also if any needed.
Editor => Alex is no longer providing the cable tools due to health reasons.
Just get in touch.
Al' ....