Page 5 of 8

Re: fascia decals

PostPosted: Fri Jul 14, 2017 6:36 pm
by snowyelan
I'll ask the supplier if there is any cost difference to have the red done...

Re: fascia decals

PostPosted: Fri Jul 14, 2017 6:49 pm
by snowyelan
Does anyone require more than 3 of each word on a sheet? I think there's 2 'window' on a dash but cant recall if there is 3 of any word?

Re: fascia decals

PostPosted: Fri Jul 14, 2017 7:43 pm
by Bud English
Scott- Thanks for reviving this!

Twin two year olds?? I'm surprised you didn't wait until they were four or five. :D

Re: fascia decals

PostPosted: Wed Jul 19, 2017 4:33 pm
by snowyelan
So I'm currently at 17 sets in white, and will be ordering them on Friday.

The red is still up in the air. If enough people (6?) are interested I will order these at a later date. Cost should be similar.

Below is the list of people ordering white. If you see an error please let me know. The list of text is on the previous page, there will be 3 of each word in a set.

Sea Ranch, You were interested in a smaller text size. Did you want to order a set at the group buy size?

Nmauduit, I haven?t added you in for white due to your interest in red.

1 Pharriso
2 mark030358
1 Bud English
1 lotustastic
3 c.garde (1 added)
2 draenog
2 gjz30075
2 Elanman68
1 ElliottN
2 SENC
1 1owner69Elan
2 snowyelan
2 Greg Foster
3 Briggs 1 (1 added)

24 total

Re: fascia decals

PostPosted: Fri Jul 21, 2017 10:16 pm
by Greg Foster
If its not too late you could add 2 more for me.
How do you want payment?
Greg

Re: fascia decals

PostPosted: Sat Jul 22, 2017 12:47 pm
by snowyelan
Hi Greg,

I'll see what I can do. I ordered yesterday, but I might be able to change the order.

I still need to figure out the best way for payments. If anyone out there has experience with payments from different currencies please let me know what works best. I used paypal once to convert to pounds but I haven't looked into it from the receiving end.

Re: fascia decals

PostPosted: Sat Jul 22, 2017 2:53 pm
by Briggs1
I'm in for two sets as well.

Briggs

Re: fascia decals

PostPosted: Sat Jul 22, 2017 2:58 pm
by gjz30075
snowyelan wrote: If anyone out there has experience with payments from different currencies please let me know what works best. I used paypal once to convert to pounds but I haven't looked into it from the receiving end.


It's easy. The buyer, also, converts his currency to dollars. Nothing to do on your end. Paypal is probably the best.

Re: fascia decals

PostPosted: Sat Jul 22, 2017 3:10 pm
by prezoom
I had problems with Pay Pal when purchasing from Dunnell Engineering. I instructed them to pay the amount charged, but they deducted a fee from the total amount paid, and Dunnell did not receive the amount billed. Had to do a work around to get him what he was due. Should have used a credit card. Not sure how the Friends and Family Pay Pal option would work on an exchange basis.

Interestingly, a recent purchase from Tony Thompson Racing on my credit card was denied and referred to their fraud department. I was notified and contacted them that the payment was legit. The requested parts were shipped, just delayed a couple of days.

Re: fascia decals

PostPosted: Sat Jul 22, 2017 4:09 pm
by gjz30075
Interesting. It's been some time now when I did an overseas purchase via paypal and it might have been
Friends and Family, but I don't remember any issues. I simply converted to their currency and sent it on its
way.

Re: fascia decals

PostPosted: Sat Jul 22, 2017 4:20 pm
by Briggs1
PayPal international has never been an issue for me.

worked flawlessly,

Re: fascia decals

PostPosted: Sat Jul 22, 2017 5:47 pm
by Elanman68
Scott,

Grateful if you would make it 2 sets for me please. Thanks.

Re: fascia decals

PostPosted: Sun Jul 23, 2017 2:17 pm
by snowyelan
Request is in to the supplier for the above additional requests. Should hear back tomorrow if they can be added to this order.

Re: fascia decals

PostPosted: Mon Jul 24, 2017 5:47 pm
by snowyelan
Caught the supplier in time, 5 more added.

Re: fascia decals

PostPosted: Mon Jul 24, 2017 10:43 pm
by Elanman68
Thanks Scott.