Plus 2 Pedal Box Reinforcment Plate Template

[Matt Elan]

As there seems to be a bit of interest in the Plus 2 Pedal box reinforcement plate here is a diagram of my plate and some pictures of the actual plate showing each side.

[SimonH]

Looks good. I was/am intending to do something similar but with a bit more footprint to be able to bond it in to spread the loads over the footbox a bit more

[Bud English]

My car already had a plate similar to yours installed, though not quite as robust, as shown in the parts list.
In addition to adding a thin layer of honeycomb like material to that whole mounting area, I fabricated the column/pedal box brace that Foxie provided the drawings for here on the forum.

Copy of BracingDRG.JPG (77.18 KiB) Viewed 121 times

viewtopic.php?t=17027&f=36&start=0#p88077
This attaches to the steering column bracket and the hand brake mount and adds considerable reinforcement to the whole area.

[Foxie]

It's nice to be "Mentioned in Dispatches" almost exactly 20 years after my original post !