Lotus Elan

Elan & Cortina GT Eng. parts

PostPost by: jk952 » Wed Nov 11, 2020 3:37 pm

Having put the Cortina crank in my previously running Elan engine, I have the following items no longer needed.
Elan:
1. Rope seal oil pan, undamaged condition. sold
2. Elan standard 4 bolt crankshaft, 010 under, good condition (was running in my car).
3. Used pistons (4) measure 3.245 on wear side at bottom and half inch up from bottom.

Cortina GT:
4. “Fast Road” cam from D. Bean engineering purchased new, never used.
5. Early recessed head, valves, seats and surfaced cleaned up ready to go but never used, this does however weigh about 40 lb so shipping difficult.
6. 681 tall block stock bore, with pistons, rods. Probably weighs about 80 lb so above Canada post max. pick up only.

1F960B6C-E58A-4FAE-B4DA-8253FAD2B00C.jpeg and


Prices:
Fast road cam $200 USD
Other items have left the building.
I am about an hour or so N. of Toronto. Shipping at cost.
Jack
Last edited by jk952 on Sun Nov 29, 2020 11:15 pm, edited 1 time in total.
jk952
Third Gear
Third Gear
 
Posts: 327
Joined: 04 Jan 2011
Location: Ont. Canada

PostPost by: jk952 » Fri Nov 13, 2020 11:44 pm

Pan is sold, Thanks.
jk952
Third Gear
Third Gear
 
Posts: 327
Joined: 04 Jan 2011
Location: Ont. Canada

Total Online:

Users browsing this forum: No registered users and 7 guests