Lotus Elan

Lotus Elan Workshop Manual Special Tool - Hub Extractor

PostPost by: JMH » Sun Feb 23, 2020 2:59 pm

A Churchill Extractor and the required knock on wheel adaptors X036 T0285Z and X036 T0286Z that is the left hand and righthand adaptors as specified in the official workshop manual Section G page 7 to remove the wheel hubs

Used a couple of times on my +2S

I bought them from my local Lotus Dealer in approximately 1985

The extractor comes with 2 different size cups to accommodate different size shaft diameters and 4 tapered and threaded cones through which the extractor is attached to a hub using threaded stud bar or similar. they were not supplied withe stud bar

They are in good condition. The main screw is smooth and turns freely. There is some surface staining caused in storage

These are professional garage tools with minimal use that make taking the hubs off an Elan straightforward affair

The extractor is also a general garage tool with numerous other applications

Any interest please send me a personal message

i am located in Aberdeen

many thanks

John
Attachments
IMG_0772.jpeg and
IMG_0760.jpeg and
JMH
First Gear
First Gear
 
Posts: 46
Joined: 10 Oct 2006
Location: Aberdeen

PostPost by: martinbrowning » Tue Feb 25, 2020 10:48 am

Hi John,

Interested in this tool; PM to follow

Cheers, Martin B
Time flies like an arrow; fruit flies like a banana.
72 Europa Special, 72 Sprint, 72 Plus 2
martinbrowning
Third Gear
Third Gear
 
Posts: 326
Joined: 07 Jun 2007
Location: Belfast

PostPost by: S3FHC » Tue Feb 25, 2020 11:16 am

Hi John,

I'm also interested (should Martin not have them)

Thank you,
Mark
S3FHC
Second Gear
Second Gear
 
Posts: 172
Joined: 23 Nov 2012

PostPost by: JMH » Tue Feb 25, 2020 2:31 pm

sold
JMH
First Gear
First Gear
 
Posts: 46
Joined: 10 Oct 2006
Location: Aberdeen

Total Online:

Users browsing this forum: No registered users and 8 guests