Lotus Elan

TTR 26R chassis for sale

PostPost by: dunclentdr » Sun Nov 20, 2016 12:06 am

I have picked up an almost new TTR, stove enamelled, 26R chassis - it is in excellent condition and has received a light bump on the very rear section - please see the photos.

It requires some fettling of the rearmost points where the wishbones attach or you could choose to have a simple welding of this section. Rest of the chassis is in almost new condition, they cost c?2500 with enamelling and reinforcement so grab a bargain - for sale at ?1395.

I have an identical and new chassis on site if you wish to take measurements.

Located in Worcestershire and the chassis is available from the first weekend of December.

David
Attachments
chassis-damage1.jpg and
chassis-damage-2.jpg and
chassis-front.jpg and
David Rose
1963 S1 - Bourne bodied
1963 S1 - Bourne bodied
1965 S2
1966 S3
1969 Europa - 210bbhp by Banks
dunclentdr
Third Gear
Third Gear
 
Posts: 345
Joined: 06 Mar 2014
Location: United Kingdom

PostPost by: dunclentdr » Mon Nov 28, 2016 10:39 pm

Now on ebay - please contact me if yu would like more details.

David

http://www.ebay.co.uk/itm/192039462799? ... 1555.l2649
David Rose
1963 S1 - Bourne bodied
1963 S1 - Bourne bodied
1965 S2
1966 S3
1969 Europa - 210bbhp by Banks
dunclentdr
Third Gear
Third Gear
 
Posts: 345
Joined: 06 Mar 2014
Location: United Kingdom

PostPost by: dunclentdr » Fri Dec 02, 2016 5:09 pm

In reply to the question about Spyder doing chassis repairs, have checked and they will no longer repair corroded chassis but will repair newer ones.

David
David Rose
1963 S1 - Bourne bodied
1963 S1 - Bourne bodied
1965 S2
1966 S3
1969 Europa - 210bbhp by Banks
dunclentdr
Third Gear
Third Gear
 
Posts: 345
Joined: 06 Mar 2014
Location: United Kingdom

PostPost by: dunclentdr » Sat Dec 03, 2016 11:31 am

The chassis has arrived now - overall in excellent condition - as you will see from the photos a bump to the rear drivers side wheel has deformed the areas where the lower rear wishbones attach.

I think rectification is either replacement of the rear flat section or skillful reforming of the wishbone attachment sections.

Open to offers if this would help with your rebuild project, it is also still on ebay for sale.

David
Attachments
img_0071.jpg and
img_0070.jpg and
img_0069.jpg and
David Rose
1963 S1 - Bourne bodied
1963 S1 - Bourne bodied
1965 S2
1966 S3
1969 Europa - 210bbhp by Banks
dunclentdr
Third Gear
Third Gear
 
Posts: 345
Joined: 06 Mar 2014
Location: United Kingdom

PostPost by: dunclentdr » Mon Jan 09, 2017 4:48 pm

Have been in contact with Sean at Spyder who has advised that replacement of the section (the flat section where the diff goes with the wishbone mounts and support arms) will cost c?350, hence selling at ?999 if anyone would like it, after repair cost this is half the price of a brand new one from TTR.

David
David Rose
1963 S1 - Bourne bodied
1963 S1 - Bourne bodied
1965 S2
1966 S3
1969 Europa - 210bbhp by Banks
dunclentdr
Third Gear
Third Gear
 
Posts: 345
Joined: 06 Mar 2014
Location: United Kingdom

PostPost by: S3FHC » Tue Jan 10, 2017 7:19 am

Hello David,
I have messaged you
Mark
S3FHC
Second Gear
Second Gear
 
Posts: 172
Joined: 23 Nov 2012

Total Online:

Users browsing this forum: vstibbard and 7 guests