Lotus Elan

efi for zetec 1.8 omex ecu

PostPost by: pauljones » Wed Sep 10, 2014 2:42 pm

For sale I have a Trust Electrical sourced EFI system for a 1.8 zetec. It comes with an early Omex 500 series ecu called a V3 and all relevent parts to make it run LESS SENSORS I need these.
This means the fuel rail and the intake plenum. Loom inc narrow band lambda sensor and ALL plugs for connection. Omex informs me it is more than able to run throttle bodies if required as its the same as a 600 series less the motor sport derived extras.
previous owner informs me it only needs a high pressure fuel source and power to work.

This will be a cheap upgrade to fuel and Ignition management for a zetec or with mods could be made to fit a twincam.

Asking price ?600 or a very close offer.

Located in south Dorset.

Paul
Kick the tyres and light them fires...!!!!!!!
pauljones
Fourth Gear
Fourth Gear
 
Posts: 968
Joined: 09 Feb 2008
Location: Gosport sur la mer,South hants

PostPost by: pauljones » Tue Sep 16, 2014 7:03 am

Here are a few pics taken of the parts and instructions given to me. There is also the main loom and a mini loom for the acr alternator. An air filter is present but would be better replaced.
Attachments
20140904_130806.jpg and
20140904_130730.jpg and
20140904_130702.jpg and
20140904_130630.jpg and
Cover of instructions
20140904_125015.jpg and
Omex ecu
20140908_150646.jpg and
Intake manifold and fuel rail
Kick the tyres and light them fires...!!!!!!!
pauljones
Fourth Gear
Fourth Gear
 
Posts: 968
Joined: 09 Feb 2008
Location: Gosport sur la mer,South hants

Total Online:

Users browsing this forum: Foxie and 5 guests