Lotus Elan

engine parts

PostPost by: alan d bell » Fri Jun 28, 2013 6:01 pm

I have the following for sale due to an expensive change of spec to a full race engine for FIA appk, during a rebuild by AGRA of Dundee.
1.reground tuftrided crank, new acl bearings to go with it, mains + 20 thou big ends +40 thou ?250
2. four new125e matched con rods .?50
3.two kent camshafts unused and ground to cosworth L2 ?150
the engine was being rebuilt for fast road, but we discovered that it was raced in period with a spence engine so decided to honour its provenance. hence the change.
alan d bell
Second Gear
Second Gear
 
Posts: 59
Joined: 30 May 2011

PostPost by: Richard hall » Tue Jul 02, 2013 7:00 pm

hi ,might be interested, i am in n ireland, do you have a contact no ?

many thanks

richard
Richard hall
New-tral
 
Posts: 11
Joined: 06 Jan 2013

PostPost by: alan d bell » Thu Jul 04, 2013 10:35 am

hi Richard
call 01592742967
regards alan
alan d bell
Second Gear
Second Gear
 
Posts: 59
Joined: 30 May 2011

PostPost by: alan d bell » Thu Jul 04, 2013 10:39 am

the engine was expected to produce 140bhp from 1585cc using these parts. I forgot to mention that the crank was balanced.
alan d bell
Second Gear
Second Gear
 
Posts: 59
Joined: 30 May 2011

PostPost by: Fredtech » Sun Jul 07, 2013 3:40 pm

Hi Alan, still got the Cam-Shafts ?.
John "Freddie" Nelson, Berks UK
26/3212 - Rebuilding
S4-Sprint DHC - Now at a new home.....
Fredtech
Second Gear
Second Gear
 
Posts: 101
Joined: 19 Oct 2010
Location: Ascot , Berks, UK

PostPost by: nomad » Sun Jul 07, 2013 8:36 pm

Alan, have you still got the con rod's and would you post to the state's?


Kurt
nomad
Fourth Gear
Fourth Gear
 
Posts: 933
Joined: 05 May 2012
Location: South Dakota, USA

PostPost by: alan d bell » Thu Aug 15, 2013 8:41 am

con rods sold the rest is still for sale. if you want any of the parts that are left pick up the phone.
alan d bell
Second Gear
Second Gear
 
Posts: 59
Joined: 30 May 2011

Total Online:

Users browsing this forum: Barney and 7 guests