Page 1 of 4

Elan Spin-Easy Wheel Spinner Tool - new photos.Latest stock

PostPosted: Mon Mar 28, 2011 3:35 pm
by keithc913
If anybody would like to purchase an Elan Wheel Spinner tool please either pm or email me,as I have several of these for sale.Brand new.?125 + ?8.50 p&p (no vat) to UK mainland.I can ship worldwide - please contact me for rates.

These were featured in the July 2009 Club Lotus News and are a handy tool which locks on to the spinner allowing easy and safe loosening and tightening to the correct torque.No need for hammers and skinned knuckles or damaged wheels !

They're manafactured from aircraft grade aluminium,lightened and hard anodised with a chemi-blacked steel hex for use with a socket - 32mm and torque wrench - 200/220 ft lbs tightening setting (which are not supplied - you'll have to buy your own !).Also,if interested will need to know what wheels you have - i.e. Minilites,26R or Standard,as the Minilite tool is slightly different.

Over 70 sold now and no complaints so far ! Full money back refund if not entirely satisfied.

I'm happy to provide any further information required.

West Sussex,UK based.

Re: Elan Spin-Easy Wheel Spinner Tool

PostPosted: Mon Mar 28, 2011 4:20 pm
by john.p.clegg
"I'm happy to provide any further information required."

First question that comes to mind is ???????

John :wink: :wink:

Re: Elan Spin-Easy Wheel Spinner Tool

PostPosted: Thu Mar 31, 2011 12:11 am
by adigra
I am interested and have emailed. Thank you.

Adi

Re: Elan Spin-Easy Wheel Spinner Tool

PostPosted: Thu Mar 31, 2011 4:10 am
by keithc913
Adi,

Thanks - you have an email as well.

Keith.

Re: Elan Spin-Easy Wheel Spinner Tool

PostPosted: Thu Mar 31, 2011 9:02 am
by adigra
Just an edit to remove my email address and to say that Keith is very nice to deal with.

Adi

Re: Elan Spin-Easy Wheel Spinner Tool

PostPosted: Sat Apr 02, 2011 7:38 am
by keithc913
Thank you !

Re: Elan Spin-Easy Wheel Spinner Tool

PostPosted: Sat Apr 02, 2011 2:36 pm
by adigra
Received the tool. Looks and feels fantastic. The car is in the shop at the moment so can't try it out, but I don't foresee any issues as it seems a very well engineered tool.

Thank you Keith.

Adi

Re: Elan Spin-Easy Wheel Spinner Tool

PostPosted: Sat Apr 02, 2011 2:40 pm
by keithc913
Adi,

I'm pleased that you're pleased !

Thanks again
Keith.

Re: Elan Spin-Easy Wheel Spinner Tool

PostPosted: Tue Apr 05, 2011 5:20 am
by keithc913
Due to the popularity of these useful tools, I'm getting low on stock but there are more about to be manafactured.

Re: Elan Spin-Easy Wheel Spinner Tool

PostPosted: Wed Apr 06, 2011 8:39 am
by keithc913
Sorry everybody but due to circumstances way beyond my control - i.e. the recent Royal Mail increase in postal charges - p&p on these will now be ?8.50.

Re: Elan Spin-Easy Wheel Spinner Tool

PostPosted: Wed Apr 06, 2011 3:38 pm
by oldelanman
Received mine this morning and I too am very pleased with it - a good design very well made and very promptly despatched. Oh and it works too ! Would recommend it.

Regards,

Re: Elan Spin-Easy Wheel Spinner Tool

PostPosted: Sun Apr 10, 2011 1:47 pm
by keithc913
Only one 'Standard' tool left now but more on their way - approx.3 weeks delivery.

Thanks to all that have shown interest !

Re: Elan Spin-Easy Wheel Spinner Tool

PostPosted: Mon Apr 11, 2011 6:05 pm
by martinbrowning
Mine arrived in the post today - really well made. Very happy with it

Martin B

Re: Elan Spin-Easy Wheel Spinner Tool

PostPosted: Mon Apr 11, 2011 6:11 pm
by keithc913
Cheers Martin

We aim to please !

Re: Elan Spin-Easy Wheel Spinner Tool

PostPosted: Wed Apr 13, 2011 10:16 pm
by oillite
Received my spin-easy tool this morning so it was up into the shed to have a rummage in my old big tools. I used to be a hgv mechanic and dug out a 3/4" square drive 32mm socket and ratchet with a 4ft long exstened handle and gave it a go.
Guess what it works a treat, no more whacking with that ruddy hammer!
Well done Keith very pleased with the tool! :D