Lotus Elan

Clearout

PostPost by: qedmotorsport » Tue Nov 17, 2009 3:24 pm

Hi guys,

We started putting up some our used bits an pieces that are sat around doing nothing, there's a few sumps and a glass bowl fuel pump on there at the moment. Got some SE and L1 type cams and maybe some other bits to go up also.

If there's anything engine related you're looking for, let me know here and i'll see if we've got it.

QED Motorsport Ebay Items
User avatar
qedmotorsport
First Gear
First Gear
 
Posts: 29
Joined: 26 Oct 2009
Location: Quorn, Leicestershire, UK

PostPost by: jono » Tue Nov 17, 2009 3:56 pm

If you have any used bits which could be used in a Lotus TC fuel injection conversion I would be interested - throttle bodies, linkages, trigger wheel etc. :?

Jono
jono
Coveted Fifth Gear
Coveted Fifth Gear
 
Posts: 1631
Joined: 17 May 2007
Location: The wet bit in the top corner of England

PostPost by: pauljones » Tue Nov 17, 2009 8:52 pm

same for me,i think EFI is the way to go.and have you go some large pistons and ring sets,85-86mm or the equivelent in imperial?
Kick the tyres and light them fires...!!!!!!!
pauljones
Fourth Gear
Fourth Gear
 
Posts: 968
Joined: 09 Feb 2008
Location: Gosport sur la mer,South hants

PostPost by: qedmotorsport » Wed Nov 18, 2009 9:06 am

Hi guys, sorry, it's a no on both (second hand). We have it all new of course ;)
User avatar
qedmotorsport
First Gear
First Gear
 
Posts: 29
Joined: 26 Oct 2009
Location: Quorn, Leicestershire, UK

PostPost by: adigra » Wed Nov 18, 2009 12:27 pm

Sprint cams perhaps?

Actually, if I may ask, how long does it usually take to reprofile cams from the time you receive them from a customer? I'm considering doing that with my SE cams if I fail locating some original Sprint ones.

Best regards,
Adi
1967 Elan S3 S/E FHC
User avatar
adigra
Fourth Gear
Fourth Gear
 
Posts: 571
Joined: 01 May 2009
Location: West Yorkshire

PostPost by: qedmotorsport » Thu Nov 19, 2009 9:36 am

Only second hand cams we seem to have are the L1 type and the SE's. It takes about a week to have cams re-profiled but, if you're sending them to us, we'd recommend re-profiling to our Q360 profile as they would cost the same and give greater performance without being over the top.
User avatar
qedmotorsport
First Gear
First Gear
 
Posts: 29
Joined: 26 Oct 2009
Location: Quorn, Leicestershire, UK

PostPost by: jono » Thu Nov 19, 2009 3:12 pm

...any chance of a bulk buy discount on FI conversions then? :lol:
jono
Coveted Fifth Gear
Coveted Fifth Gear
 
Posts: 1631
Joined: 17 May 2007
Location: The wet bit in the top corner of England

PostPost by: qedmotorsport » Fri Nov 20, 2009 2:29 pm

Forum bulk discounts are a road we've been down before and one which we are reluctant to go down again.

If we had a commitment to a certain number of kits (10+) that were to be shipped at the same time to the same address and payment was upfront, we may be able to work something out.
User avatar
qedmotorsport
First Gear
First Gear
 
Posts: 29
Joined: 26 Oct 2009
Location: Quorn, Leicestershire, UK

PostPost by: Carlos A » Sat Nov 21, 2009 4:41 am

Where are the parts?
http://yourgarage.nbc.com/cars/Lotus1970?vehicleID=112804

BUY GAS WITHOUT ETHANOL: http://www.pure-gas.org/
User avatar
Carlos A
Third Gear
Third Gear
 
Posts: 225
Joined: 16 Mar 2008
Location: USA (Nothern IN) & Spain

Total Online:

Users browsing this forum: BrianA and 4 guests