Page 1 of 1

Spyder Zetec bracket

PostPosted: Sun Oct 13, 2013 4:41 pm
by Stratosboy
Hi - Has anyone who has built a spyder zetec elan, got a diagram or pic of how they mounted the Speedo Transducer? or could help me with how it is mounted?
It needs to fit under the rear chassis pointing at the c/v bolts.
Thanks

Re: Spyder Zetec bracket

PostPosted: Sun Oct 13, 2013 8:51 pm
by elanman999
Hi,
I have an electronic speedo on my Elan, not a Spyder but it may give you some ideas. The sensor is mounted on the rear hub carrier looking at the disc mounting bolts. I hope the pic explains all.
Cheers
John
IMG_0584rs.JPG and

Re: Spyder Zetec bracket

PostPosted: Sun Oct 13, 2013 9:10 pm
by Stratosboy
Cheers John,
most helpful, I think I'm getting it now, just need to make up a little bracket and see where best to fit it.
appreciate your help.
Dave