Page 1 of 2

My Zetec +2 project update

PostPosted: Sat Sep 14, 2013 9:51 pm
by Netec99
I started posting my Zetec project under the name " my modified early spyder chassis". The project has moved on since and I finally drove the car out of the garage today. :D
Here are a few pictures of the car so far

Re: My Zetec +2 project update

PostPosted: Sun Sep 15, 2013 4:54 am
by GrUmPyBoDgEr
Looks terrific; a lot of thought & hard work gone into that for sure.

Re: My Zetec +2 project update

PostPosted: Mon Sep 16, 2013 9:28 pm
by Jeff@Jae
Fantastic results so far.

Re: My Zetec +2 project update

PostPosted: Sun Jun 08, 2014 9:07 pm
by Netec99
Here are a few more pictures of my project car. Passed MOT this weekend :D
Just got to sort a few teething issues to sort out before giving it some good run outs.
So hopefully on the road in the next week

Re: My Zetec +2 project update

PostPosted: Mon Jun 09, 2014 6:02 am
by PeterK
Looking good Rob :)

Re: My Zetec +2 project update

PostPosted: Mon Jun 09, 2014 6:10 am
by rgh0
You appear to have got the ride height around original (or perhaps even lower) compared to many plus 2 Zetecs that are jacked up for ground clearance under the sump and exhaust. What have you done to achieve that?

cheers
Rohan

Re: My Zetec +2 project update

PostPosted: Mon Jun 09, 2014 4:36 pm
by Bud English
Fantastic job! Not only beautifully accomplished but your timeline is amazing to one who is moving at a much slower pace. You inspire me!

Your pictures answer my question, "Can painted bumpers be made to look good on a +2?" They sure can. I also like the de-chromed look of your grill opening and, as stated above, you've nailed the ride height. Very well done. :D

Re: My Zetec +2 project update

PostPosted: Tue Jun 10, 2014 1:57 pm
by Netec99
PeterK wrote:Looking good Rob :)

Thanks Peter.
How is your project coming along. ?
Sorry, lost your contact details, send them over again and I must come over and have a look at your car.
Rob

Re: My Zetec +2 project update

PostPosted: Tue Jun 10, 2014 2:02 pm
by Netec99
rgh0 wrote:You appear to have got the ride height around original (or perhaps even lower) compared to many plus 2 Zetecs that are jacked up for ground clearance under the sump and exhaust. What have you done to achieve that?

cheers
Rohan

Hi Rohan,
Because I'm using an original modified Spyder chassis, I have been able to use fully adjustable shocks front and rear.
The ground clearance is OK, but I do need to be very careful over some speed bumps. I could raise it higher, but I think it will spoil the look.
regards
Rob

Re: My Zetec +2 project update

PostPosted: Tue Jun 10, 2014 2:57 pm
by john.p.clegg

Re: My Zetec +2 project update

PostPosted: Tue Jun 10, 2014 9:00 pm
by Netec99
john.p.clegg wrote:What you need is...

http://www.rideanddrop.com/Web/Super%20 ... 20kit.html

John :wink:

Thanks John,
When I want to pimp my ride, I know who to contact 8)
Rob

Re: My Zetec +2 project update

PostPosted: Sat Jun 14, 2014 7:43 pm
by ElanSeries2
How have you dealt with the sump and exhaust manifold? These are the two things that usually stop +2 Zetecs from being able to sit at that ride height! I see you used an Escort Zetec sump, and you mention modifying it - what did you end up with? Grinding a bit of the ally away, and also dropping the ARB?

Your car does look the business, though - congratulations, you must be delighted!

Re: My Zetec +2 project update

PostPosted: Fri Jun 20, 2014 12:37 pm
by LaikaTheDog
Rob

I am also embarking on an early Spyder chassis rebuild just as yours. Very interested in your Gaz adjustable upgrade. Can you post make and model of those for me ?

Netec99 wrote:
rgh0 wrote:You appear to have got the ride height around original (or perhaps even lower) compared to many plus 2 Zetecs that are jacked up for ground clearance under the sump and exhaust. What have you done to achieve that?

Thanks

L

cheers
Rohan

Hi Rohan,
Because I'm using an original modified Spyder chassis, I have been able to use fully adjustable shocks front and rear.
The ground clearance is OK, but I do need to be very careful over some speed bumps. I could raise it higher, but I think it will spoil the look.
regards
Rob

Re: My Zetec +2 project update

PostPosted: Thu Sep 25, 2014 2:26 pm
by MrB
Hi where did you get your cage and side impact bars?i have spoken to spyder ans safety devices and the both say they dont do one for the plus 2 130s cheers

Re: My Zetec +2 project update

PostPosted: Tue Sep 30, 2014 11:14 am
by cal44
I'm not easily impressed....................But....... I'm impressed.
Sweet Ride..............


mike