Page 1 of 2
QUICKSHIFT KIT
Posted:
Wed Mar 09, 2011 9:23 am
by rspsteve
Hi all
I have an elan gearbox that i,m going to use in my twincam anglia (1200 casing 2000e internals ) .
Can anyone tell me if i can buy a quickshift lever kit for it and if i can where from?
Thanks in advance .
Steve
Re: QUICKSHIFT KIT
Posted:
Wed Mar 09, 2011 11:49 am
by twincamman
well speed shifting is not good for these gear boxes ----the forks bend so take time to enjoy each shift or find an other box ---ed
Re: QUICKSHIFT KIT
Posted:
Wed Mar 09, 2011 11:49 am
by twincamman
well speed shifting is not good for these gear boxes ----the forks bend so take time to enjoy each shift or find an other box ---ed
Re: QUICKSHIFT KIT
Posted:
Wed Mar 09, 2011 3:19 pm
by john.p.clegg
You can say that again!!
John
Re: QUICKSHIFT KIT
Posted:
Wed Mar 09, 2011 3:40 pm
by elanfan1
and again!
Re: QUICKSHIFT KIT
Posted:
Wed Mar 09, 2011 6:55 pm
by rspsteve
Its not for shifting quickly , its for reducing gearstick travel, usually about -50 %
Re: QUICKSHIFT KIT
Posted:
Wed Mar 09, 2011 7:17 pm
by twincamman
then play with your shift leaver length ed
Re: QUICKSHIFT KIT
Posted:
Wed Mar 09, 2011 8:24 pm
by elan_fan
Re: QUICKSHIFT KIT
Posted:
Wed Mar 09, 2011 9:40 pm
by rspsteve
Thanks very much.
Steve
Re: QUICKSHIFT KIT
Posted:
Mon Mar 21, 2011 11:25 pm
by bcmc33
Re: QUICKSHIFT KIT
Posted:
Thu Apr 18, 2013 7:25 am
by john.p.clegg
Well I've just fitted one to my Lotus (maxi derived) 5 speed box and am well pleased with the result...
John
Re: QUICKSHIFT KIT
Posted:
Thu Apr 18, 2013 9:22 am
by bcmc33
john.p.clegg wrote:Well I've just fitted one to my Lotus (maxi derived) 5 speed box and am well pleased with the result...
John
John,
Which one did you use? Any pictures?
Will you be at Donington on Saturday?
Maybe I can look at it then?
Re: QUICKSHIFT KIT
Posted:
Thu Apr 18, 2013 9:23 am
by bcmc33
John,
Which one did you use? Any pictures?
Will you be at Donington on Saturday?
Maybe I can look at it then?
Re: QUICKSHIFT KIT
Posted:
Thu Apr 18, 2013 11:37 am
by vernon.taylor
Salut
I think the Escort RS quickshift could fit both Lotus boxes. It looks like the standard item with a metal collar to move the pivot point up.
Graham Boulton of 5-speed 'box rebuilding renown, told me not to put a quickshift - he said the 5-speed baulk rings are easily snapped.
@+
Vernon
Re: QUICKSHIFT KIT
Posted:
Thu Apr 18, 2013 12:27 pm
by john.p.clegg
Sorry no photos of this,was a bit busy,and yes, should be at Donny on Saturday,the quickshift was a Ebay bargain for ?15 and it has a metal collar as Vernon says and takes quite a bit of getting used to as the throw is now tiny...but makes the gargantuan sloppy shift a thing of the past
John