What anti freeze to use
6 posts
• Page 1 of 1
Have been looking through the forum and still confused what make of anti freeze to use and how much.
Lot of talk about using ionised water.
Lot of talk about using ionised water.
- Frampty
- First Gear
- Posts: 16
- Joined: 08 Oct 2021
- Location: Bristol
Hi,
Mono-ethylene glycol based antifreeze, the blue stuff. 50/50 with de-ionised water.
Cheers
Mark
Mono-ethylene glycol based antifreeze, the blue stuff. 50/50 with de-ionised water.
Cheers
Mark
-
mark030358 - Coveted Fifth Gear
- Posts: 1252
- Joined: 29 May 2004
- Location: Willaston, Wirral
As above, I always use de-ionised water, 50/50 with Bluecol anti-freeze.
I used it for years in my Elan, and also my Alfa Twincams.
I used it for years in my Elan, and also my Alfa Twincams.
Current :- Elan S3 DHC SE S/S 1968,
1963 Alfa Giulia Ti Super Rep.
Previous :-
Elan S3 DHC SE SS 1968,
Elan S3 DHC S/E 1966
Elan S3 FHC Pre-Airflow 1966
1963 Alfa Giulia Ti Super Rep.
Previous :-
Elan S3 DHC SE SS 1968,
Elan S3 DHC S/E 1966
Elan S3 FHC Pre-Airflow 1966
- elans3
- Fourth Gear
- Posts: 507
- Joined: 12 Sep 2003
- Location: Doncaster, South Yorks.
I am in the states but I use Peak Global Lifetime in all my Lotus cars.
Available over here at most Walgreens and on Amazon last i checked.
Tony V
Available over here at most Walgreens and on Amazon last i checked.
Tony V
Tony Vaccaro
LOONY (Lotus Owners of New York)
http://www.lotusowners.com
Drive Fast Take Chances
72 Elan Sprint, 93 Caterham (Bought new), 05 Elise RD (Bought new),
99 Elise190, 05 Elise BLK (Bought nearly new), 2024 Emira, 2005 MiataSpeed Turbo
LOONY (Lotus Owners of New York)
http://www.lotusowners.com
Drive Fast Take Chances
72 Elan Sprint, 93 Caterham (Bought new), 05 Elise RD (Bought new),
99 Elise190, 05 Elise BLK (Bought nearly new), 2024 Emira, 2005 MiataSpeed Turbo
-
tvacc - Coveted Fifth Gear
- Posts: 1201
- Joined: 24 Dec 2003
- Location: Buffalo NY
What’s the view on using OAT antifreeze in a twin cam?
Elan +2
Elise mk 1
Elise mk 1
- Donels
- Fourth Gear
- Posts: 722
- Joined: 10 Sep 2016
- Location: Tamworth
Donels wrote:What’s the view on using OAT antifreeze in a twin cam?
If you have copper and solder in your coolant system then I would stick to the Green non OAT antifreeze. If you have replaced the radiater and heater with aluminum cores then you could use OAT if you wanted to. Whatever you use make sure you change it regulalrly.
-
rgh0 - Coveted Fifth Gear
- Posts: 8990
- Joined: 22 Sep 2003
- Location: Melbourne, Australia
6 posts
• Page 1 of 1
Total Online:
Users browsing this forum: No registered users and 17 guests