Lotus Elan

Original DHC Hood Tray Trim

PostPost by: trw99 » Thu Apr 18, 2024 2:33 pm

The finishing trim that clips over the top edge of the rear of the hood tray on my Sprint is original. In the Parts List it is described as 'Trim, Rear Decking'.

At over 50 years old and being made mostly of cotton (over a steel stretcher), it has rather inevitably shrunk a little. I am quite sure that I wish to retain it, since my car is original and I prefer to repair, not replace, where possible. Besides, it is no longer made in the same way and not with cotton, according to Susan Miller.

Has anyone found a good way to stretch this trim part, gently, without damaging it, by any chance? I'm fairly sure wetting it, stretching it and allowing it to dry will not do the trick. I can live with it as it is but if anyone has a useful trick, please let me know!

Tim
Attachments
Rear Tray Cotton Finisher 1.jpg and
Rear Tray Cotton Finisher 2.jpg and
User avatar
trw99
Coveted Fifth Gear
Coveted Fifth Gear
 
Posts: 3327
Joined: 31 Dec 2003
Location: Essex/Herts border, UK

PostPost by: Gordon Sauer » Thu Apr 18, 2024 2:43 pm

Id try woollies, I’m pretty amazed at what they have, Gordon
Gordon Sauer
Fourth Gear
Fourth Gear
 
Posts: 691
Joined: 20 Aug 2004
Location: Irving, Texas

PostPost by: Elanman99 » Thu Apr 18, 2024 7:14 pm

My car is a 1968 S4 DHC and I am pretty sure it did not originally have any finishing strip on the edge of the bodywork. I dont recall seeing any on Sprints either.

As I see it and trim in that position would prevent the hood material sitting flat to the surface.

Ian
68 Elan S4 DHC. Built in a weekend from a kit (just like the advert said)
User avatar
Elanman99
Fourth Gear
Fourth Gear
 
Posts: 742
Joined: 11 Sep 2003
Location: Sandiway, Cheshire UK

PostPost by: saildrive2001 » Thu Apr 18, 2024 7:25 pm

My car is a 69 S4 & it definitely had a strip covering the edge of the glass fibre. I got a new piece from MacGregor here in Ontario. He has most of the rubber etc. trim pieces for the Elan. www.macgregorukcarparts.com.
No affiliation to him, I just have bought things from him for my car.
Keith Marshall
69 S4 SE DHC RHD Original owner
saildrive2001
Fourth Gear
Fourth Gear
 
Posts: 599
Joined: 29 Oct 2003
Location: Ontario, Canada

PostPost by: mark030358 » Thu Apr 18, 2024 9:13 pm

I still have my original cotton trim edge piece, not sure you can buy like for like replacements.

cheers
User avatar
mark030358
Coveted Fifth Gear
Coveted Fifth Gear
 
Posts: 1257
Joined: 29 May 2004
Location: Willaston, Wirral

PostPost by: IainP » Fri Apr 19, 2024 5:30 pm

My car definitely still has the original trim as per Tim’s photos.
Iain
IainP
First Gear
First Gear
 
Posts: 35
Joined: 07 Dec 2023
Location: Uk

PostPost by: Elanintheforest » Thu Apr 25, 2024 7:29 am

Tim, the trim used came from a Mk2 Ford Cortina where it was used to cover the door aperture edges.

In late 1969, Ford changed the trim from cloth covering to a plastic covering, making it a little more robust. The cloth covering would fray quite easily giving a very tatty look!

Obviously Lotus carried on with the original stuff for quite a lot longer, but when I searched to replace mine a few years ago, I couldn't find the cloth replacement, so used the plastic one. It does look pretty much identical as the plastic has the same fabric texture, but obviously it is not original!

I wonder if the later / last Sprints used the plastic covered trim as well?

Mark
Attachments
zz 20201019 30.JPG and
20190831 22.JPG and
User avatar
Elanintheforest
Coveted Fifth Gear
Coveted Fifth Gear
 
Posts: 2954
Joined: 04 Oct 2005
Location: Forest Of Dean, Gloucestershire

PostPost by: mark030358 » Thu Apr 25, 2024 8:11 pm

Elanintheforest wrote:Tim, the trim used came from a Mk2 Ford Cortina where it was used to cover the door aperture edges.

In late 1969, Ford changed the trim from cloth covering to a plastic covering, making it a little more robust. The cloth covering would fray quite easily giving a very tatty look!

Obviously Lotus carried on with the original stuff for quite a lot longer, but when I searched to replace mine a few years ago, I couldn't find the cloth replacement, so used the plastic one. It does look pretty much identical as the plastic has the same fabric texture, but obviously it is not original!

I wonder if the later / last Sprints used the plastic covered trim as well?

Mark


Love that Cortina is that a 1600E?

cheers
User avatar
mark030358
Coveted Fifth Gear
Coveted Fifth Gear
 
Posts: 1257
Joined: 29 May 2004
Location: Willaston, Wirral

PostPost by: IainP » Fri Apr 26, 2024 6:22 am

Tim

The Mk1 Cortina club might have an answer..
https://mk1cortina.club/index.php/shop- ... ric-detail
Iain
IainP
First Gear
First Gear
 
Posts: 35
Joined: 07 Dec 2023
Location: Uk

PostPost by: Elanintheforest » Fri Apr 26, 2024 7:56 am

mark030358 wrote:
Elanintheforest wrote:Tim, the trim used came from a Mk2 Ford Cortina where it was used to cover the door aperture edges.

In late 1969, Ford changed the trim from cloth covering to a plastic covering, making it a little more robust. The cloth covering would fray quite easily giving a very tatty look!

Obviously Lotus carried on with the original stuff for quite a lot longer, but when I searched to replace mine a few years ago, I couldn't find the cloth replacement, so used the plastic one. It does look pretty much identical as the plastic has the same fabric texture, but obviously it is not original!

I wonder if the later / last Sprints used the plastic covered trim as well?

Mark


Love that Cortina is that a 1600E?

cheers


It is Mark, but it's an original RHD 2 door 1600E, one of 28 made, and the only one left on the road!
I found it in Bulawayo, Zimbabwe, a few years back, and despite it being a little play-worn, I had to buy it as i'd been looking for one for over 30 years!

I have a small write-up of the story of the car at the bottom of this section on my Lotus Cortina website....

https://www.lotuscortinainfo.com/?page_id=3704

Mark
User avatar
Elanintheforest
Coveted Fifth Gear
Coveted Fifth Gear
 
Posts: 2954
Joined: 04 Oct 2005
Location: Forest Of Dean, Gloucestershire

PostPost by: trw99 » Fri Apr 26, 2024 3:05 pm

Thank you all for your replies.

In the end I refitted this original trim part on a warm day and it clipped in just fine. Once the hood went back on the permanent studs at the rear of the hood kept the trim neatly in place with the aid of large penny washers.

I should point out that I did write in my first post that 'I am quite sure that I wish to retain it, since my car is original and I prefer to repair, not replace, where possible. ... I can live with it as it is but if anyone has a useful trick, please let me know!', so I shall not be replacing this part at all.

From the pedantic originalist, Tim.
User avatar
trw99
Coveted Fifth Gear
Coveted Fifth Gear
 
Posts: 3327
Joined: 31 Dec 2003
Location: Essex/Herts border, UK

PostPost by: mark030358 » Fri Apr 26, 2024 3:48 pm

Elanintheforest wrote:
mark030358 wrote:
Elanintheforest wrote:Tim, the trim used came from a Mk2 Ford Cortina where it was used to cover the door aperture edges.

In late 1969, Ford changed the trim from cloth covering to a plastic covering, making it a little more robust. The cloth covering would fray quite easily giving a very tatty look!

Obviously Lotus carried on with the original stuff for quite a lot longer, but when I searched to replace mine a few years ago, I couldn't find the cloth replacement, so used the plastic one. It does look pretty much identical as the plastic has the same fabric texture, but obviously it is not original!

I wonder if the later / last Sprints used the plastic covered trim as well?

Mark


Love that Cortina is that a 1600E?

cheers


It is Mark, but it's an original RHD 2 door 1600E, one of 28 made, and the only one left on the road!
I found it in Bulawayo, Zimbabwe, a few years back, and despite it being a little play-worn, I had to buy it as i'd been looking for one for over 30 years!

I have a small write-up of the story of the car at the bottom of this section on my Lotus Cortina website....

https://www.lotuscortinainfo.com/?page_id=3704

Mark



What an excellent read that was, thanks for sharing. A good friend of mine had a 4 door 1600E in red and another chap I knew had a Fern Green one. I always thought they were a stunningly good looking saloon back then. One question, some cars had the four clocks on top of the dash and some below... why was that?

thanks
Mark
User avatar
mark030358
Coveted Fifth Gear
Coveted Fifth Gear
 
Posts: 1257
Joined: 29 May 2004
Location: Willaston, Wirral

PostPost by: Elanintheforest » Fri Apr 26, 2024 5:41 pm

The 4 clocks on top were on the Series 1 cars, and the clocks in the dash are Series 2, from October 1968 on. The GT, Lotus and 1600E all had the 4 small clocks.

Mark
User avatar
Elanintheforest
Coveted Fifth Gear
Coveted Fifth Gear
 
Posts: 2954
Joined: 04 Oct 2005
Location: Forest Of Dean, Gloucestershire

PostPost by: mark030358 » Fri Apr 26, 2024 9:58 pm

Elanintheforest wrote:The 4 clocks on top were on the Series 1 cars, and the clocks in the dash are Series 2, from October 1968 on. The GT, Lotus and 1600E all had the 4 small clocks.

Mark


Thanks got the info :D
User avatar
mark030358
Coveted Fifth Gear
Coveted Fifth Gear
 
Posts: 1257
Joined: 29 May 2004
Location: Willaston, Wirral

Total Online:

Users browsing this forum: Billelan and 16 guests