parts
9 posts
• Page 1 of 1
On my Elan S3 LH-1967, I have to replace: the combined wiper / washer pump switch (original? I don't know!)
Which model would be the right one, the choice and its reference Lucas
To order parts, I have contacted Miss Miller since the beginning of the year !, But I have not received any response! If you share a direct contact, if you can ask her to check my emails which are open. (I live in France)
thank you for helping me
Gerard
Which model would be the right one, the choice and its reference Lucas
To order parts, I have contacted Miss Miller since the beginning of the year !, But I have not received any response! If you share a direct contact, if you can ask her to check my emails which are open. (I live in France)
thank you for helping me
Gerard
- geni
- Second Gear
- Posts: 158
- Joined: 30 Dec 2014
- Location: FRANCE
Hi Gerard,
My 1967 S3 has a rotary switch to start the wipers and further rotation increases the speed. Pressing it in operates the pump. It is a ford part and was fitted to the Corsair and others.
They are usually considered unobtainable so I do not think Sue Miller will be able to help.
I put it on permanent watch on ebay and found one after a few years.
They do turn up, best of luck.
For me a phone call works better with Sue.
Eric in Burnley
1967 S3SE DHC
My 1967 S3 has a rotary switch to start the wipers and further rotation increases the speed. Pressing it in operates the pump. It is a ford part and was fitted to the Corsair and others.
They are usually considered unobtainable so I do not think Sue Miller will be able to help.
I put it on permanent watch on ebay and found one after a few years.
They do turn up, best of luck.
For me a phone call works better with Sue.
Eric in Burnley
1967 S3SE DHC
- ericbushby
- Fourth Gear
- Posts: 986
- Joined: 13 Jun 2011
- Location: east lancashire
If I remember correctly, I was able to adapt a 1970-79 Triumph GT6 windshield washer pump/switch to fit the one on my S3 Elan. I got it from http;//bpnorthwest.com
Charlie Warner
Fatto Gatto Racing
Fatto Gatto Racing
-
fattogatto - Third Gear
- Posts: 272
- Joined: 23 Sep 2015
- Location: Memphis, TN
merci a vous tous qui avez su me répondre a ma question de mon interrupteur rotatif HS
comme Ericbushby qui a bien détaillé ma pièce HS donc d'origine que je recherche ,alors si vous connaissez faite moi coucou .
Pour appeler Miss Miller difficile pour moi l'anglais !et depuis la France ! alors si une âme charitable devrait lui parler ,il suffit de l'informer qu'une (des)personnes attente de l'entendre de l'autre côté du chanel !
Vous souhaitant Joyeuses Pâques en oubliant le virus
comme Ericbushby qui a bien détaillé ma pièce HS donc d'origine que je recherche ,alors si vous connaissez faite moi coucou .
Pour appeler Miss Miller difficile pour moi l'anglais !et depuis la France ! alors si une âme charitable devrait lui parler ,il suffit de l'informer qu'une (des)personnes attente de l'entendre de l'autre côté du chanel !
Vous souhaitant Joyeuses Pâques en oubliant le virus
- geni
- Second Gear
- Posts: 158
- Joined: 30 Dec 2014
- Location: FRANCE
Here is an expired ebay listing with some information on what I think may be the rotary switch part. The pump part shows up pretty often but I think there may be a screw thread issue to be sure of in order to join them together.
https://www.ebay.com/itm/Austin-Morris- ... 1438.l2649
John
https://www.ebay.com/itm/Austin-Morris- ... 1438.l2649
John
- baileyman
- Third Gear
- Posts: 281
- Joined: 17 Aug 2017
- Location: Boston
Because, shortly the ebay listing will no longer be accessable, here's the listing title to preserve the
part number, and a picture of the part.
Austin Morris Triumph MG Hillman Sunbeam Ford Vauxhall Rotary Switch Lucas 34325
part number, and a picture of the part.
Austin Morris Triumph MG Hillman Sunbeam Ford Vauxhall Rotary Switch Lucas 34325
Greg Z
45/0243K Sprint
36/5727 pre airflow coupe
45/0243K Sprint
36/5727 pre airflow coupe
-
gjz30075 - Coveted Fifth Gear
- Posts: 3085
- Joined: 12 Sep 2003
- Location: Roswell, Georgia, USA
I agree with Eric, the original parts are not obtainable new. My S3 was missing the washer pump part of the switch, but did have the switch, but had a bolt inserted in the rear to prevent the unit from being depressed (pumped). The switch worked as it should and an aftermarket electric pump had been installed.
I managed to get a complete used replacement off e-bay, as well as some spares (another pump body) from another place that I can't recall. They do come up occasionally but can be quite pricey.
I managed to get a complete used replacement off e-bay, as well as some spares (another pump body) from another place that I can't recall. They do come up occasionally but can be quite pricey.
Skittle. 1967 Elan S3 DHC
- skelteanema
- Second Gear
- Posts: 182
- Joined: 11 Dec 2003
- Location: New Zealand
I have the above surplus to requirements.
I paid £100 ( if memory serves) on ebay
Graeme
S4 SE
S2 GTS
Peterson JPS Exige
S4 SE
S2 GTS
Peterson JPS Exige
-
661 - Fourth Gear
- Posts: 936
- Joined: 29 Mar 2012
- Location: East Sussex
Graeme
S4 SE
S2 GTS
Peterson JPS Exige
S4 SE
S2 GTS
Peterson JPS Exige
-
661 - Fourth Gear
- Posts: 936
- Joined: 29 Mar 2012
- Location: East Sussex
9 posts
• Page 1 of 1
Total Online:
Users browsing this forum: No registered users and 8 guests