Page 1 of 1
S4 Rear light section
Posted:
Wed Jan 02, 2019 6:01 pm
by Concrete-crusher
Hi
Does anybody have an unwanted S4 Rear light section or an S4 rear body mould?
My rear end is flat like the S3, the S4 is raised around the lights
I m going to do a respray soon so would like to get the rear looking correct and for that I need add in the raised light mouldings by bonding in the raised section to the otherwise flat board
Hope this makes sense
Steve
Re: S4 Rear light section
Posted:
Wed Jan 02, 2019 10:36 pm
by gherlt
Hi,
you should contact user Dieschelan. He has an S3 with S4 lights and he is going to change that in the next months. I suppose he has no use to the cut out, so if you are not in a hurry, he could save it for you.
Regards
Guillermo
Re: S4 Rear light section
Posted:
Sun Jan 06, 2019 8:11 pm
by Concrete-crusher
Does anybody have a 3d or sketch up or cad file which includes the rear light mounting part of the body?
I realise today I could have the section printed on a 3d printer and just cover with fibreglass
Just a. Hope
Steve
Re: S4 Rear light section
Posted:
Sun Jan 06, 2019 11:15 pm
by knockoffnut
Hi Steve,
Wouldn't it be easier to take an S4 car (of a friend or forum member) wrap it with cling film and pull a mold off it? Just a thought...
Re: S4 Rear light section
Posted:
Sun Jan 06, 2019 11:51 pm
by pharriso
knockoffnut wrote:Hi Steve,
Wouldn't it be easier to take an S4 car (of a friend or forum member) wrap it with cling film and pull a mold off it? Just a thought...
+1
Re: S4 Rear light section
Posted:
Mon Jan 07, 2019 7:55 am
by elanfan1
There are internal differences so just sticking the outer shape to the flat won?t entirely solve your issue. I?d suggest you need a rear clip and cut out the section you need and bond in a replacement. I?d suggest you give Boss Motors a call and see if they have one available - if not I doubt it would take them very long to lay one up and I can?t see it being an unreasonable cost.
Let us know.