Page 1 of 1
Elan 412 spec sheet
Posted:
Wed May 18, 2016 9:01 am
by Team Lotus
Involved a lot of Matt black..........
Re: Elan 412 spec sheet
Posted:
Wed May 18, 2016 10:31 am
by Mazzini
Where on earth did you find that?
Ah I just looked at your old posts
Re: Elan 412 spec sheet
Posted:
Wed May 18, 2016 11:58 am
by pharriso
"Team Lotus" must be Richard Parramint...
Re: Elan 412 spec sheet
Posted:
Thu May 19, 2016 8:18 am
by Mazzini
This morning in the rush hour traffic I spotted a matt dark green Evoque and a matt black BMW, Lotus were obviously forty years too early with the idea.
I wonder if, during the product life of the Elan, Lotus ever considered replacing the 1500 pre-cross flow block with the 1600 cross flow?
Re: Elan 412 spec sheet
Posted:
Thu May 19, 2016 8:44 am
by trw99
The Sprint flyer used at the 1970 Motor Show mentions the intention to have the following variants:
Sprint 355 - Fitted with a 3.55 final drive ratio for 'effortless long distance touring in excess of 110 mph with maximum speed of 125 mph'
Sprint 377 - Fitted with a 3.77 final drive ratio 'for the best combination of high touring speed and rapid acceleration'
Sprint 399 - Fitted with a 3.99 final drive ration for 'very rapid acceleration but top speed curtailed to 115 mph by rev limitation'
My assumption is that 'Sprint 412' project would therefore have either a 4.12 final drive ratio (unlikely?) or a 5 speed (ZF) gearbox.
Tim
Re: Elan 412 spec sheet
Posted:
Fri May 20, 2016 8:10 am
by Team Lotus
Here you are Tim........
Re: Elan 412 spec sheet
Posted:
Fri May 20, 2016 8:13 am
by Team Lotus
Another one...
Re: Elan 412 spec sheet
Posted:
Fri May 20, 2016 1:44 pm
by trw99
Thank you again, Richard.
Look at those performance figures! No wonder they called it Sprint! Imagine 'cruising' on the autobahn with that 4.12 FD!
Tim