Page 2 of 2
Re: Sellers / Ekland Elan
Posted:
Fri Apr 03, 2020 1:07 am
by vstibbard
No problems at all, as you can see it was an aluminium roof conversion made by Shapecraft that was fitted to approx 12-14 cars, it was an attractive conversion that was also functional as it increased a Shapecraft's top speed compared to a "standard" 26R of the period as as the airflow more efficiently over the body.
Road car had no rear quarter windows, whereas two 26R's converted cars did.
V
Re: Sellers / Eckland Elan
Posted:
Fri Apr 03, 2020 1:16 am
by Slowtus
hatman wrote:I believe it's actually 'Eklund' - I merely mention the fact for what it may be worth...
You are correct Britt Ekland (Swedish pronunciation: [ˈbrɪtː ˈěːkland] (About this soundlisten); born Britt-Marie Eklund;
Re: Sellers / Eckland Elan
Posted:
Fri Apr 03, 2020 1:16 am
by Slowtus
elansprint71 wrote:hatman wrote:I believe it's actually 'Eklund' - I merely mention the fact for what it may be worth...
Fact?
Britt Ekland (Swedish pronunciation: [ˈbrɪtː ˈěːkland] (About this soundlisten); born Britt-Marie Eklund;
Re: Sellers / Ekland Elan
Posted:
Fri Apr 03, 2020 4:29 pm
by bigvalvehead
Vaughan, Greg
I think the problem was ED!! not the cars.
Dave
Re: Sellers / Ekland Elan
Posted:
Fri Apr 03, 2020 7:55 pm
by greg40green
I think the Shape Craft is a fantastic addition to the Elan line up and hope to create one myself .
vstibbard wrote:No problems at all, as you can see it was an aluminium roof conversion made by Shapecraft that we fitted to approx 12-14 cars, it was an attractive conversion that was also functional as it increased a Shapecraft's top speed compared to a "standard" 26R of the period as as the airflow more efficiently over the body.
Road car had no rear quarter windows, whereas two 26R's converted cars did.
V
Re: Sellers / Ekland Elan
Posted:
Fri Apr 03, 2020 7:57 pm
by greg40green
Hello Dave
Didn't you start building a a new fibreglass/ Shapecraft bodied Elan ?
bigvalvehead wrote:Vaughan, Greg
I think the problem was ED!! not the cars.
Dave
Re: Sellers / Ekland Elan
Posted:
Sat Apr 04, 2020 9:14 am
by bigvalvehead
Hi Greg
I have moulds for the Shapecraft roof and boot and I am building a Honda S2000 powered Shapecraft.
Cheers
Dave
Re: Sellers / Ekland Elan
Posted:
Thu Apr 09, 2020 8:55 pm
by elansprint71
bigvalvehead wrote:
I currently have the very first Shapecraft in the workshop undergoing extensive bodywork refurb , including a new front end.
Dave Hughes
Dave- is this 39PG? Are you fitting a replica of the modified nose?
Pete.
Re: Sellers / Ekland Elan
Posted:
Sun Apr 12, 2020 12:40 pm
by bigvalvehead
Hi Pete
I am working on 39PG as it was once.
The current owner didn't want the original nose remade but has gone for a 26R front end instead.
The original was Fugly!
The shell in the pics is my S1 Honda powered shell.
Cheers
Dave
Re: Sellers / Ekland Elan
Posted:
Sun Apr 12, 2020 6:51 pm
by elansprint71
Dave,
Current owners, eh?! Are they worse than DPO's?
I wonder what happened to Sellers own "ordinary" Elan DHC?
Hope you are OK.
Re: Sellers / Ekland Elan
Posted:
Mon Apr 13, 2020 7:14 am
by trw99
That’s alive and very well in a private collection. It has been restored to full original status.
Tim