locating door clips
Posted: Wed Sep 21, 2005 9:09 pm
I am looking for two "clips" that are used in my +2.
The first is the headliner tube peg. This "clip" is formed from metal wire.
One end slips into the headliner support tube while the other end is screwed
onto the fiberglass above the door opening.
The second is the door actuating rod guides. They are not listed in the
parts book. They are plastic "clips". One end pushes into holes that are drilled
into metal straps that are attached to the metal door frame. The other end is
a 3/4 circle. The rod clips into it and will remain captive and slide within
this clip. It functions as a rod guide and anti-rattle piece.
If anyone knows where these were sourced from or where that may be found,
pl;ease let me know.
Thanks.
Bob
1969 Elan +2
The first is the headliner tube peg. This "clip" is formed from metal wire.
One end slips into the headliner support tube while the other end is screwed
onto the fiberglass above the door opening.
The second is the door actuating rod guides. They are not listed in the
parts book. They are plastic "clips". One end pushes into holes that are drilled
into metal straps that are attached to the metal door frame. The other end is
a 3/4 circle. The rod clips into it and will remain captive and slide within
this clip. It functions as a rod guide and anti-rattle piece.
If anyone knows where these were sourced from or where that may be found,
pl;ease let me know.
Thanks.
Bob
1969 Elan +2