Lotus Elan

+2 part needed

PostPost by: rdssdi » Thu Aug 18, 2005 2:18 am

I am posting this again. Can anyone help me locate this part. I tried the
"usual suspects".


I am approaching reassembly of my 1969 Elan +2. I now notice that the
transmission "ball end assembly" P/N 050-F-0129 is bent. This is the part that fits
into the transmission and the shift lever attaches to it. The +2 part is of
a larger diameter than the Elan version. It also has a hole through the
threaded portion for a pin.

If anyone has one please let me know.

I found an Elan version but they are not the same.

Thanks

Bob
1969 Elan +2
rdssdi
Coveted Fifth Gear
Coveted Fifth Gear
 
Posts: 1419
Joined: 30 Sep 2003

PostPost by: john.p.clegg » Thu Aug 18, 2005 7:05 am

Bob
i was waiting for someone else to respond but here goes..
Surely the part you have should be "bent", mine is?
What diameter of shaft are you after as i did not realise the "baby" and plus 2 were different?

John


***@***.***e:
I am posting this again. Can anyone help me locate this part. I tried the
"usual suspects".


I am approaching reassembly of my 1969 Elan +2. I now notice that the
transmission "ball end assembly" P/N 050-F-0129 is bent. This is the part that fits
into the transmission and the shift lever attaches to it. The +2 part is of
a larger diameter than the Elan version. It also has a hole through the
threaded portion for a pin.

If anyone has one please let me know.

I found an Elan version but they are not the same.

Thanks

Bob
1969 Elan +2
User avatar
john.p.clegg
Coveted Fifth Gear
Coveted Fifth Gear
 
Posts: 5691
Joined: 21 Sep 2003
Location: Manchester

PostPost by: "e s" » Thu Aug 18, 2005 4:22 pm

I think he is referring to the actual bottom actuator section, it should not be bent, and gets that way by accident etc.
----- Original Message -----
From: "JOHN CLEGG" <***@***.***>
To: ***@***.***
Subject: Re: [LotusElan.net] +2 part needed
Date: Thu, 18 Aug 2005 08:05:33 +0100 (BST)


Bob
i was waiting for someone else to respond but here goes..
Surely the part you have should be "bent", mine is?
What diameter of shaft are you after as i did not realise the
"baby" and plus 2 were different?

John


***@***.***e:
I am posting this again. Can anyone help me locate this part. I tried the
"usual suspects".


I am approaching reassembly of my 1969 Elan +2. I now notice that the
transmission "ball end assembly" P/N 050-F-0129 is bent. This is
the part that fits
into the transmission and the shift lever attaches to it. The +2 part is of
a larger diameter than the Elan version. It also has a hole through the
threaded portion for a pin.

If anyone has one please let me know.

I found an Elan version but they are not the same.

Thanks

Bob
1969 Elan +2







--
_______________________________________________

Search for businesses by name, location, or phone number. -Lycos Yellow Pages

http://r.lycos.com/r/yp_emailfooter/htt ... RC=lycos10
"e s"
 

Total Online:

Users browsing this forum: Crodger and 12 guests