Page 2 of 2

Output drive shaft Plus 2

PostPosted: Tue Jun 28, 2005 3:06 pm
by john.p.clegg
David
Before you offer this service i suggest you take a look at the amount of wear in the photo!!!!!!
John


"***@***.***" <***@***.***> wrote:
Hi David,
That would be most helpful.
Regards
Jeff.

ALLEN, David wrote:


Output drive shaft Plus 2

PostPosted: Wed Jun 29, 2005 8:11 am
by davidallen
Hi,

We use Yorkshire plating services ltd, 01274 651148. The contact is Steve
Widdup. Note they do hard chrome plating, not decorative, so you will not be
able to have your bumpers done at the same time!

I have not seen the photo, but the process is used for building up a few
thou. I suggest you ask their advice if the wear is greater. They have the
experience know if a repair would be practical.


David

-----Original Message-----
From: JOHN CLEGG [mailto:***@***.***
Sent: 28 June 2005 16:06
To: ***@***.***
Subject: Re: [LotusElan.net] Output drive shaft Plus 2


David
Before you offer this service i suggest you take a look at the
amount of wear in the photo!!!!!!
John


"***@***.***" <***@***.***> wrote:
Hi David,
That would be most helpful.
Regards
Jeff.

ALLEN, David wrote:























CONFIDENTIALITY NOTICE

The information contained in this e-mail is intended only for the
confidential use of the above named recipient. If you are not the intended
recipient or person responsible for delivering it to the intended recipient,
you have received this communication in error and must not distribute or
copy it. Please accept the sender's apologies, notify the sender immediately
by return e-mail and delete this communication. Thank you.

Output drive shaft Plus 2

PostPosted: Wed Jun 29, 2005 1:00 pm
by saarhus
I'm having trouble finding the photo. Can anyone direct me to it, please?

Thanks!

Stan (getting the shaft)
Hi,

We use Yorkshire plating services ltd, 01274 651148. The contact is Steve
Widdup. Note they do hard chrome plating, not decorative, so you will notbe
able to have your bumpers done at the same time!

I have not seen the photo, but the process is used for building up a few
thou. I suggest you ask their advice if the wear is greater. They have the
experience know if a repair would be practical.


David

-----Original Message-----
From: JOHN CLEGG [mailto:***@***.***
Sent: 28 June 2005 16:06
To: ***@***.***
Subject: Re: [LotusElan.net] Output drive shaft Plus 2


David
Before you offer this service i suggest you take a look at the
amount of wear in the photo!!!!!!
John


"***@***.***" <***@***.***> wrote:
Hi David,
That would be most helpful.
Regards
Jeff.

ALLEN, David wrote:























CONFIDENTIALITY NOTICE

The information contained in this e-mail is intended only for the
confidential use of the above named recipient. If you are not the intended
recipient or person responsible for delivering it to the intended recipient,
you have received this communication in error and must not distribute or
copy it. Please accept the sender's apologies, notify the sender immediately
by return e-mail and delete this communication. Thank you.













SPONSORED LINKS Plus Sprint Devoted
Including Enjoy Impressions


------------------------------------------------------------------------------





***@***.***




------------------------------------------------------------------------------

Output drive shaft Plus 2

PostPosted: Wed Jun 29, 2005 3:01 pm
by jeff jackson
Stan
Look in the gallery on lotuselan.net.
Jeff

Stan Aarhus wrote: