Page 1 of 1
Homologated weight Elan GTS/26R
Posted:
Mon Dec 09, 2013 9:19 amby batfish
Just weighed my car whilst setting up the corner weights and it only weighs 550 Kgs. SI homologated weights are 580kgs that means a massive 30kg of added weight required. I only have the homolgation papers for S1 road cars are there lower weights for the race cars?
regards
Andy
Re: Homologated weight Elan GTS/26R
Posted:
Mon Dec 09, 2013 9:54 amby twincamman
Hi Andy ...mine is 1480 or so empty and with a race battery magnesium bell housing a set of real mag wheels , light body single wiper , non pop up head lights alloy diff cover etc etc and a 1/2 mk 1 dash .I changed it to a full dash as I can't compete any more. .the advantage of adding weight as opposed to adding lightness is you can add the pounds where it can improve handling or enjoy that pizza and beer diet The homologation papers ..are they like zig zags?..
...ed
Re: Homologated weight Elan GTS/26R
Posted:
Mon Dec 09, 2013 12:41 pmby Old English White
batfish wrote:Just weighed my car whilst setting up the corner weights and it only weighs 550 Kgs. SI homologated weights are 580kgs that means a massive 30kg of added weight required. I only have the homolgation papers for S1 road cars are there lower weights for the race cars?
regards
Andy
580kg is the homologated weight for an FIA Elan GTS/10, but,
30kg are just enough for a second seat, trip master's a lamp, a second coil& fuel pump and wiring, etc...
If driving solo, think about changing ally or mag diff casing with original cast iron, this is where the need is first... Then, think about low.
With a "superlight" body from TTR, we achieve quite easily a 540kg GTS/10 Elan, and put the weight back after, thinking low, reliable AND safety.
This to say that with this homologated weight, the Elan still has a chance to keep its avantage on handling, depending on driver style. With a steel body, such quest would cost a fortune, speaking both time & money...
Christian.
Re: Homologated weight Elan GTS/26R
Posted:
Mon Dec 09, 2013 1:41 pmby batfish
Lesson learnt number 538. any one want want to buy a magnesium gearbox casing, aluminium tail shaft and mag bellhousing !
Andy
Re: Homologated weight Elan GTS/26R
Posted:
Fri Dec 13, 2013 10:38 pmby toomspj
Mag gearbox casing was never homologated so far as I am aware. Paul
Re: Homologated weight Elan GTS/26R
Posted:
Sat Dec 14, 2013 2:32 pmby batfish
Yes I know that now makes you wonder why TTR sell them.
Re: Homologated weight Elan GTS/26R
Posted:
Mon Dec 23, 2013 9:24 amby SJ Lambert
'Cause magnesium is yummy & there ought to be more of it!!
Re: Homologated weight Elan GTS/26R
Posted:
Tue Dec 24, 2013 2:15 pmby elansprint71
batfish wrote:Lesson learnt number 538. any one want want to buy a magnesium gearbox casing, aluminium tail shaft and mag bellhousing !
Andy
Andy, the Homologation papers you sent me do have alloy tailshaft housing and clutch housing, shown as optional extras dated 11 July (Jiullet) 1964. I hope you have not started dismantling!