Page 1 of 1

Noise: Static & Drive-by

PostPosted: Fri Mar 04, 2011 9:15 am
by The Old Italian
Over in the Elan lounge I've posted a question as to where I can find a track prepared Elan suitable for trackdays, but it's just occured to me that maybe exhaust or induction noise on a non-standard car
would rule it out at circuits that have unsympathetic noise limits.

I know that the specs will vary but can anybody please share their noise testing results
so that I can get a spectrum of what to expect.

Thanks.
Ian.

Re: Noise: Static & Drive-by

PostPosted: Fri Mar 04, 2011 6:24 pm
by ardee_selby
Ian,

I see you have no replies yet, so FWIW, I remembered posts in the archives wrt measurement issues and grief with a "standard car" at Castle Coombe.

elan-archive-f16/castle-coombe-track-day-debacle-long-t6732.html
elan-archive-f16/castle-coombe-track-day-debacle-conclusion-t6956.html
elan-f15/trackday-noise-t12738.html

Hopefully things have improved since then..no doubt others will be along soon to update on current practices...

HIH Cheers - Richard

Re: Noise: Static & Drive-by

PostPosted: Fri Mar 11, 2011 9:55 am
by twincamman
If you point the exhaust tip toward the ground it helps lower
The db count ...ed

Re: Noise: Static & Drive-by

PostPosted: Fri Mar 11, 2011 8:29 pm
by gav
Ed

Thing is if you do that in a paddock that is dusty, you really hack off your neighbour - the dust goes everywhere.

Ho hum

Gavin

Re: Noise: Static & Drive-by

PostPosted: Fri Mar 11, 2011 10:27 pm
by twincamman
may be but you lose 20 db -priorities-and hope the 2 dry days you get during a typical English summer happen during the week -ed