Steering Column Seal
5 posts
• Page 1 of 1
From memory there is a "metal ring" that fits around the shaft, it is stepped to accept a felt seal and is held in place by a couple of self tapping screws.
I think it has to be fitted over the shaft when the shaft is out as it is not split so the shaft has to be passed through it.
I think it has to be fitted over the shaft when the shaft is out as it is not split so the shaft has to be passed through it.
Brian
64 S2 Roadster
72 Sprint FHC
64 S2 Roadster
72 Sprint FHC
-
types26/36 - Coveted Fifth Gear
- Posts: 3402
- Joined: 11 Sep 2003
When new my S4 had a small rectangular plate with a central clearance hole (about 1" diameter) and two smaller fixing holes. This plate was fastened to the firewall with self tappers so that it trapped a bit of rubber sheet that the column passed through.
Ian Phillips
Ian Phillips
-
Elanman99 - Third Gear
- Posts: 449
- Joined: 11 Sep 2003
You might find it at a Triumph dealer - its a Triumph part
I've seen it in their part list
Anna
I've seen it in their part list
Anna
1965 S2
- Emma-Knight
- Third Gear
- Posts: 363
- Joined: 26 Mar 2004
5 posts
• Page 1 of 1
Total Online:
Users browsing this forum: No registered users and 32 guests